Milwaukee 2653-20 User Manual

Browse online or download User Manual for Power tools Milwaukee 2653-20. SERVICE PARTS LIST - Milwaukee Electric Tool

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
MILWAUKEE ELECTRIC TOOL CORPORATION
13135 W. Lisbon Road, Brook eld, WI 53005
Drwg. 8
BULLETIN NO.
54-26-2650
SERVICE PARTS LIST
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 31-12-2653 Rubber Cap (1)
2 45-22-0012 Sleeve (1)
3 34-60-0005 Retaining Ring (1)
4 45-88-0022 Washer (1)
5 40-50-0056 Spring (1)
9 45-88-2653 Plastic Washer (1)
10 02-02-1100 4.0mm Steel Ball (1)
11a --------------- 1/4" Hex Anvil (1)
12 02-02-1300 5mm Steel Ball (1)
19 02-02-0180 4.7mm Steel Ball (2)
24 --------------- Ring Gear (1)
25 44-66-2653 Gearcase End Cap with Ball Bearing (1)
27 --------------- Stator Assembly (1)
28 45-30-2653 Rubber Slug (4)
34 --------------- PCBA (1)
35 23-66-2653 On-Off Switch (1)
36 --------------- Terminal Block Assembly (1)
37 45-24-2653 Fwd/Rev Shuttle (1)
38 40-50-1135 Spring (1)
42 40-50-1090 Spring (1)
43 --------------- Left Handle Halve (1)
44 --------------- Belt Hook (1)
45 06-82-0130 6-32 x 5/16" Pan Hd. T-15 Machine Scr (1)
46 06-82-2653 M3.5 x 8mm Pan Hd. Plastite Screw (2)
47 --------------- Right Handle Halve (1)
48 12-20-2653 Service Nameplate (Not Shown) (1)
49 42-55-2653 Carrying Case (1)
CATALOG NO. 2653-20
REVISED BULLETIN
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
M18 FUEL™ 1/4" Hex Impact Driver
STARTING
SERIAL NO.
DATE
Mar. 2015
WIRING INSTRUCTION
E42A
SEE PAGE 2
3
4
5
2
1
57
9
59
35
25
27
28
36
43
63
37
34
38
42
50
(9x)
46
(2x)
47
60
28 43 46
47 48 50
62
27 34
35 36
56
2 3 4 5 9
10 11a 25 51 57
58
44
45
49
44
45
19(2x)
11a
10
12
61
19
24
51
64
2 3 4 5
10 11a 51
24
65
59
60
IMPORTANT NOTE: Gearcase end cap #25 is
LEFT HAND THREAD!
As an aid to assembly,
carefully lower the complete
front end of tool (gearcase /
impacting system) onto the
gearcase end cap. Gently
hand tighten front end
assembly onto gearcase
end cap. Be careful not
to cross-thread! Once
installed by hand, seat
gearcase end cap with a
good adjustable wrench
using light pressure.
Do not over tighten!
LEFT HAND THREAD
1
2
NOTE: Components of the impacting
assembly (61) can drop out of the
gearcase (57). Care must be taken to
hold those elements in place when
assembling onto
the gearcase end
cap (25).
51
10
NOTE: Place anvil
spring (51) onto
anvil (11a) with
curled end
inserted in
slot of anvil
as shown.
Place ball (10)
in anvil slot in
front of spring.
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
50 06-82-7236 4-20 x 5/8" Pan Hd. Plastite T-10 Scr (9)
51 40-50-0018 Anvil Spring (1)
56 14-30-2653 Gearcase Assembly (1)
57 28-50-2653 Front Gearcase (1)
58 42-70-2653 Belt Clip Assembly (1)
59 --------------- Rotor Assembly (1)
60 --------------- Handle Assembly (1)
61 14-30-2655 Impacting Assembly (1)
62 14-20-2653 Electronics Assembly (1)
63 45-24-2655 Speed Selector (1)
64 42-06-0020 1/4" Hex Anvil Assembly (1)
65 14-46-2653 Rotor/Handle Kit (1)
FIG. LUBRICATION
(Type 'J' Grease, No. 49-08-4220):
10,11a Lightly coat front washer surface of anvil (11a) with grease,
place a dab in the ball slot of anvil and in needle bearing
inside the anvil.
24,61 Lightly coat the I.D. of the ring gear (24) and the center of
the planet gears of impacting assembly with grease.
57 Coat inside of bushing inside front gearcase with grease.
59 Coat pinion of rotor assembly (59) with grease.
IMPORTANT NOTICE!
The original design for the Anvil Assembly (and corresponding
components) are no longer available. Tools manufactured prior
to the serial number E42AD124901722 cannot order individual
parts (2, 3, 4, 5, 10, 11a or 51). Hex Anvil Assembly 42-06-0020
must be ordered. For proper servicing in the future, it is recom-
mended that the nameplate be marked with a '' at the end of
the serial number, using an indelible marker to document this
upgrade*. Tools manufactured after serial number
E42AD124901722 can order all individual anvil parts listed.
It is recommended to order service name-
plate 12-20-2653 to record the new serial
number E42AD124901722.
*
= 14-20-2654
Electronics Assy.
Assembly going ob-
solete. Replaced by:
Page view 0
1 2

Summary of Contents

Page 1 -

MILWAUKEE ELECTRIC TOOL CORPORATION13135 W. Lisbon Road, Brookfi eld, WI 53005Drwg. 8BULLETIN NO.54-26-2650SERVICE PARTS LIST FIG.

Page 2

ROTORSTATORPCB ASSEMBLYON-OFF SWITCHWIRE TIE= WIRE TRAPS or GUIDESLEDTERMINAL BLOCKASSEMBLYSPEED SELECTORTHIS SLEEVE IS ROUTED OVER THERIGHT SIDE OF

Comments to this Manuals

No comments