Milwaukee 2441-20 Service Manual download pdf (Page 3)

SP05-3

www.greggdistributors.ca

OUTSIDE MICROMETERS -

SERIES 103 - METRIC

•Hammertone, baked-enamel-nished frame •Ratchet Stop for

exact repetitive readings •With a standard bar except for 0-25

mm model •Comes with ratchet stop

INTERCHANGEABLE ROD TYPE

DEPTH MICROMETER -

SERIES 129, 329

•4 mm interchangeable rods, with

lapped measuring end, provide a

wide measuring range •The rod

length can be adjusted in 1” or 25

mm increments •With ratchet stop

for constant force •With measuring

rod clamp •Supplied in tted

plastic case

OUTSIDE MICROMETERS -

SERIES 104

•Wide measuring range

with interchangeable anvils

•Ratchet Stop for constant

force •Supplied with zero-

setting standards bar for

each range •Supplied in

tted wooden case

OUTSIDE MICROMETERS -

SERIES 103 - INCH

•Hammertone, baked-enamel-nished frame •Ratchet Stop

for exact repetitive readings •With a standard bar except for

0-1”model •Comes with ratchet stop

MITUTOYO

Micrometers

MIT/2825

Technical Data

Graduation: 0.01 mm, 0.001 mm

Flatness: 0.6 μm for models up to 300 mm

1μ for models over 300 mm

Parallelism: (2+R/100)μm, R=max, range (mm)

Measuring faces: Carbide tipped

Technical Data

Accuracy: ±.00012”/±3μm for micrometer head feed

Resolution*: .00005”/0.001mm or 0.001mm

Graduation: .001” or 0.01mm

Flatness of reference face: .00005” for 2.5”/1.3μm for 63.5 mm width base,

.00008” for 4”/2μm for 101.6 mm width base

Flatness of measuring rod face: 0.3μm

Parallelism between reference face and measuring rod face:

[.00016 + (.00004 x R/2]”

R=max. measuring range (inch)

(4+L/50)μm, L=Max. measuring length (mm)

Measuring rod diameter: .157”/4 mm

Display*: LCD

Battery*: 357BPZ

Battery life*: Approx. 3.5 years under normal use *Digital model

Technical Data

Accuracy: ±[.00016” +.00004 (L/3)”] L = Max Range (Inch)

Graduation: .001” (104-165: is .0001”)

Flatness: .000024” for models up to 12”

Parallelism: .00008” for models up to 3”

.00012” for models up to 6”

±[.00008” + .00004 (L/4)”] L= Max range (inch)

Measuring faces: Carbide tipped (spindle only)

Technical Data

Graduation: .001” or .0001”

Flatness: .000024” for models up to 12”

Parallelism: [.00008 + .00004 (L/4)]” L= max range (inch)

Measuring faces: Carbide tipped

Part No.

Range

Accuracy

Base Size

Accuracy

Come with

Graduation

Mass (g)

Rod

Quantity

Mass (g)

Mass

(kg)

103-137 0 - 25 mm ±2μm 175

103-138 25 - 50 mm ±2μm 215

103-139-10 50 - 75 mm ±2μm 315

103-140-10 75 - 100 mm ±3μm 375

103-141-10 100 - 125 mm ±3μm 515

103-142-10 125 - 150 mm ±3μm 665

103-143-10 150 - 175 mm ±4μm 720

103-144-10 175 - 200 mm ±4μm 920

103-145-10 200 - 225 mm ±4μm 1080

103-146-10 225 - 250 mm ±5μm 1255

Analog Model

129-127 0-4” 2.5” x .63” 4 rods

129-131 0-4” 4” x .63” 4 rods

129-128 0-6” 2.5” x .63” 6 rods

129-132 0-6” 4” x .63” 6 rods

129-149 0-12” 2.5” x .63” 12 rods

129-150 0-12” 4” x .63” 12 rods

Digital Model - Inch/Metric

329-350-10 0-6”/0-152.4 mm 4”x.63” 6 rods

329-351-10 0-12”/0-304.8 mm 4”x.63” 12 rods

103-177 0 - 1” .001” ±.0001” 175

103-260* 0 - 1” .0001” ±.0001” 175

103-178 1 - 2” .001” ±.0001” 215

103-262* 1 - 2” .0001” ±.0001” 215

103-179 2 - 3” .001” ±.0001” 315

103-217* 2 - 3” .0001” ±.0001” 315

103-180 3 - 4” .001” ±.00015” 375

103-218* 3 - 4” .0001” ±.00015” 375

103-181 4 - 5” .001” ±.00015” 515

103-219* 4 - 5” .0001” ±.00015” 515

103-182 5 - 6” .001” ±.00015” 665

103-220* 5 - 6” .0001” ±.00015” 665

103-183 6 - 7” .001” ±.0002” 720

103-184 7 - 8” .001” ±.0002” 920

103-185 8 - 9” .001” ±.0002” 1080

103-186 9 - 10” .001” ±.00025” 1255

103-187 10 - 11” .001” ±.00025” 1405

103-188 11 - 12” .001” ±.00025” 1565

104-137 0-6” .001” 1.35 6 anvils & 5 standards

104-138 6-12” .001” 2.65 6 anvils & 6 standards

*.0001"Reading is obtained with vernier

129-127

OUTSIDE MICROMETER KITS -

SERIES 103

•Micrometer Set .0001” Graduation Model

Part No. 103-907-40, 6 pc. Micrometer Kit. Includes 0-1”, 1-2”,

2-3”, 3-4”, 4-5”, and 5-6” micrometers.

Part No. 103-908-40, 12 pc. Micrometer kit. Includes 0-1”,

1-2”, 2-3”, 3-4”, 4-5”, 5-6”, 6-7”, 7-8”, 8-9”, 9-10”, 10-11”, and

11-12” micrometers.

•Micrometer Set .001” Graduation Model

Part No. 103-930, 4 pc. Micrometer Kit. Includes 0-1”, 1-2”,

2-3”, and 3-4” micrometers.

103-908-40

103-930

SPHERICAL FACE MICROMETERS -

SERIES 115, 295, 395

•Designed to measure the wall thickness of various tubing

•Ratchet Stop for constant force •Supplied in tted plastic case

Technical Data

Battery: 357BPZ

Accuracy: Refer to the list of specications.

Flatness: .000024” / 0.6μm

Part No. Range AccuracyGraduation Mass

Analog

115-253* 0 - 1” .0001” ±.00015” 180

Mechanical counter model

295-215 0 - 25 mm 0.01 mm ±3μm 220

295-253* 0 - 1” .0001” ±.00015” 220

Digital model (IP65 Approved) - Inch/Metric

0 - 1”/ .00005”/

395-371 0 - 25.4 mm 0.001 mm ±.0001” 270

1”-2”/ .00005”/

395-372 25.4- 50.8 mm 0.001 mm ±.0001” 330

2” - 3”/ .00005”/

395-373 50.8-76.2 mm 0.001 mm ±.0001” 470

3” - 4”/ .00005”/

395-374 76.2-101.6 mm 0.001 mm ±.00015” 625

395-371

295-215

*.0001"Reading is obtained with vernier

EXTENSION ROD TYPE TUBULAR

INSIDE MICROMETERS - SERIES 137

•Wide range of ID measurements by combining extension rods

(pipes) and anvils with the micrometer head •Supplied in tted

plastic case

Technical Data

Accuracy: ±{.00012+n+(.00004xR/2)}*

R=Maximum

measuring length (inch),

Fraction rounded up

Graduation: 0.01mm or .001”

Part No. Range

Travel of

Micrometer Head

Extension Rods

.5”, 1”, 2” (2 pcs.), 4”,

137-214 2” - 60” .5” 8” (2 pcs.), 12”

329-350-10

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Milwaukee 2441-20 Service Manual Page 3

Comments to this Manuals