Milwaukee 1854-1 Specifications download pdf

Milwaukee Tool

Heavy-Duty, Super Hole Shooter

Model Numbers: 1854-1, 1854-3, 1855-20, 2404-1, 2405-20

Safety Instructions

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire and/or personal injury

GENERAL SAFETY RULES

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the presence of flam-

mable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions

can cause you to lose control. Protect others in the work area from debris such as chips and

sparks. Provide barriers or shields as needed.

4. Grounded tools must be plugged into an outlet properly installed and grounded in

accordance with all codes and ordinances. Never remove the grounding prong or modify

the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if

you are in doubt as to whether the outlet is properly grounded. If the tools should electri-

cally malfunction or break down, grounding provides a low resistance path to carry electricity

away from the user.

5. Double Insulated tools are equipped with a polarized plug (one blade is wider than the

other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in

the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a

polarized outlet. Do not change the plug in any way. Double insulation ~O eliminates the

WARNING!

WORK AREA

ELECTRICAL SAFETY

1 2 3 4 5 6 7

Safety Instructions 1
SPECIFICATIONS 7

Summary of Contents

Page 1 - Safety Instructions

Milwaukee ToolHeavy-Duty, Super Hole ShooterModel Numbers: 1854-1, 1854-3, 1855-20, 2404-1, 2405-20Safety InstructionsREAD AND UNDERSTAND ALL INSTRUCT

Page 2

need for the three wire grounded power cord and grounded power supply system.6. Avoid body contact with grounded surfaces such as pipes, radiators, ra

Page 3

17. Do not force tool. Use the correct tool for your application. The correct tool will do thejob better and safer at the rate for which it is designe

Page 4

SPECIFIC SAFETY RULES1. Hold tool by insulated gripping surfaces when performing an operation where the cut-ting tool may contact hidden wiring or its

Page 5

GROUNDINGImproperly connecting the grounding wire can result in the risk of electric shock. Checkwith a qualified electrician if you are in doubt as t

Page 6

Double Insulated Tools: Tools with Two Prong PlugsTools marked "Double Insulated" do not require grounding. Theyhave a special double insula

Page 7 - SPECIFICATIONS

Cat. No.1-1/2”1854-1Flat BoringBitsHoleSawsAugerBitsShip AugerBitsSelfeedBitsSteelBitCarbideTip Bit120AC/DC1854-32401-1*1855-202405-20*120AC/DC120AC/D