Milwaukee M12 IR Operator's Manual download pdf (Page 32)

30 M12 160x120 Thermal Imager Operator’s Manual

resolution Same as “thermal sensitivity.” The number of meaningful digits in a temperature reading, for

example, “10 °C, 10.1 °C, or 10.01 °C.” For the 10.01 °C reading, the resolution is “0.01 °C.”

saved image An image written (recorded) onto the SD card installed in the Thermal Imager. Once saved,

images stay intact on the SD memory card when you turn off the Thermal Imager power.

scale The Thermal Imager uses your choice of two temperature scales: °C for Celsius or °F for

Fahrenheit.

SD Card Removable, reusable ash memory storage cards commonly used in digital cameras. The

Thermal Imager accepts SD (up to 4 MB) and SDHC (for “High Capacity,” greater than 4 MB

up to 32 MB) SD cards. It does not accept mini-SD or micro-SD cards.

sensor Also called “detector,” or “thermal sensor,” the component that detects temperatures

throughout the eld of view. Model M12 160x120’s detector is a microbolometer. (See

“microbolometer.”)

sleep mode Automatic battery-conserving mode that begins after 5 minutes with no activity. The Thermal

Imager remains ready to operate, so warm-up is not required when in sleep mode. This is not

the same as auto power-off, which occurs after 20 minutes of no activity.

span The width of the measurement window from the lowest measured temperature to the highest

measured temperature. The “Level” setting moves this window up or down in temperature.

spectral range The IR bandwidth, or longest to shortest infrared wavelengths that the Thermal Imager

detects.

storage Electronic memory (also called “Flash memory”) for saving the images and data created in

the Thermal Imager during a work session. The Thermal Imager uses a standard SD (Secure

Digital) removable, re-usable memory card as its sole storage system. Once images are

loaded onto a computer, you can erase the SD card.

1 2 ... 27 28 29 30 31 32 33 34 35 36

No comments

Milwaukee M12 IR Operator's Manual Page 32