Milwaukee 2441-20 Service Manual download pdf (Page 7)

SP05-7

www.greggdistributors.ca

MITUTOYO

Bore & Hole Gauges

Radius Gauges

MIT/2825

ABSOLUTE DIGIMATIC BORE GAUGE

- SERIES 511

•The minimum value holding function provides the easy detec-

tion of hole diameter •Up to three sets of master value and

upper/lower tolerance value can be memorized •An analog

bar indicator is integrated to enhance the intuition in reading

•GO/±NG judgment is performed by setting the upper and

lower tolerances •Up to four rods (250 mm or 500 mm) can

be used

Part No. Range Probe depth

511-521 1.8-4”/45-100 mm 6” (152.4 mm)

Technical Data

Accuracy: Wide Range: 0.003 mm/.00012”

Narrow Range: 0.002 mm/.00008”

Resolution: .00005"/0.001 mm

Display: LCD

Battery: 357BPZ

Battery life: Approx. 9 months for normal use

Dust/Water protection level: Conforming to IP53

BORE GAUGES - SERIES 511

•Most popular Bore Gauges •Carbide-tipped contact points

for durability •The dial indicator is fully protected by a rugged

cover •Dial indicators sold separately for all except #511-743

Technical Data

Accuracy: 2μm / .00008”

Indication stability: 1μm / .00004”

Graduation: 0.01 mm, 0.001 mm, .0005” or .0001”

Part No.

Measuring

Range

Number of Anvils

Number of

Spacers

Metric - Gauge Stem ø 8mm

511-701 18 - 35 mm 9 2

511-702 35 - 60 mm 6 4

511-703 50 - 150 mm 11 (50 mm Sub Anvil) 4

Inch - Gauge Stem ø 3/8”

511-731 .7-1.4” 9 2

511-732 1.4-2.5” 6 4

511-733 2.0 - 6.0” 11 (2” sub anvil) 4

511-743* 2.0 - 6.0” 11 (2” sub anvil) 4

*Comes with #2922SB Graduation dial indicator

BOREMATIC SET - SERIES 568

The Borematic enables the operator to take measurements more accurately and quicker than

ever before. Once the origin point is set with the ORIGIN button, the Borematic retains the

setting for the entire battery life. Therefore no longer repeated origin setting (presetting) is

necessary.

•TiN-coated measuring contact points provide excellent durability and impact resistance and al-

low the instrument to measure to the bottom of a blind hole •Large LCD digits of 8.5 mm height

for error-free reading •330° rotatable display unit for easy reading at any angle •GO/NO-GO

judgment function •The ABSOLUTE linear encoder

eliminates over-speed errors •With SPC data output

•Measurement can be taken closer to the bottom of a

blind bore •Supplied in tted wooden case •Each set

includes one display unit with interchangeable measuring

heads of the sizes specied and extension rod •Range:

6 - 12 mm

Part No. 568-924.

Technical Data

Resolution: 0.001 mm or .00005"/0.001 mm

Contact point: Carbide or TiN coating

Measuring method: Three-point method

Display: LCD

Battery: 357BPZ

Battery life: Approx. 7,000 hours

4 PC. SMALL HOLE GAUGES - SERIES 154

•Used with an outside micrometer for measuring inside diameter of bores •4 sizes of gauges are

supplied in a tted pouch •Extra long for gaging

deep and shallow holes, slots, and similar

workpieces •Gaging surface is fully hardened to

insure long tool life

Part No. 154-901, Set comes with the following:

Part No. 154-105, .125” - .2” DIA. gauge.

Part No. 154-106, .2” - .3” DIA. gauge.

Part No. 154-107, .3” - .4” DIA. gauge.

Part No. 154-108, .4” - .5” DIA. gauge.

RADIUS GAUGES - SERIES 186

•Radius size is stamped on each gauge •Both concave and convex radius

gauges become a pair •With a locking clamp •180° arc

25 PC. RADIUS GAUGE SET - SERIES 186

MITUTOYO Radius Gauges are recommended for checking or laying out concave or convex

radii. An individual gauge for each dimension makes it

possible to verify radius or llet dimensions easier, faster

and more accurately in machining, layout, inspection and

pattern-making work. The measuring surfaces are precisely

nished with smooth, accurate edges. Each Radius Gauge

has ve measuring locations, and it is identied with its

particular radius dimensions. The gauges have a satin or

dull-chrome nish. The holding case is provided to protect

the sets of Radius Gauges, have indexed pockets to facili-

tate the selection of the proper size gauge. A 4” long holder

is furnished with this set to make it possible to check radii

in conned or hard-to-reach locations. 25 leaves with sizes

from 1/64”–17/64” by 64ths and 9/32”–1/2” by 32nds.

Part No. 186-901.

Part No. Range Composition of Leaves

Inch

186-101 1/32” - 1/4” 15 pairs: 1/32” - 1/4” by 64ths

186-102 17/64” - 1/2” 16 pairs: 17/64” - 1/2” by 64ths

Metric

186-105 1 - 7 mm 34 pairs: 1 - 3 mm by 0.25 mm 3.5 - 7 mm by 0.5 mm

186-106 7.5 - 15 mm 32 pairs: 7.5 - 15 mm by 0.5 mm

186-102

186-105

Part No.

Measuring

Range

Number of Anvils

Number of

Spacers

Metric - Gauge Stem ø 8mm

511-921 18 - 150 mm 26 (50 mm Sub Anvil) 10

Inch - Gauge Stem ø 3/8”

511-931* .7 - 6” 26 (2” sub anvil) 10

3 PC. BORE GAUGES - SERIES 511

•Carbide-tipped contact points for durability •The dial indicator

is fully protected by a rugged cover

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Milwaukee 2441-20 Service Manual Page 7

Comments to this Manuals