Milwaukee 48-59-1801 User Manual download pdf (Page 4)

Cleaning

Clean out dust and debris from charger vents and

electrical contacts by blowing with compressed air.

Use only mild soap and a damp cloth to clean the

battery pack and charger, keeping away from all

electrical contacts. Certain cleaning agents and

solvents are harmful to plastics and other insulated

parts. Some of these include gasoline, turpentine,

lacquer thinner, paint thinner, chlorinated cleaning

solvents, ammonia and household detergents

containing ammonia. Never use flammable or

combustible solvents around battery packs, char-

ger, or tools.

Repairs

The MILWAUKEE Li-Ion charger has no service-

able parts.

FIVE YEAR TOOL LIMITED WARRANTY

Every MILWAUKEE electric power tool (including battery charger) is warranted to the original purchaser only

to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or

replace any part on a electric power tool which, after examination, is determined by MILWAUKEE to be defec-

tive in material or workmanship for a period of ﬁ ve (5) years* after the date of purchase. Return the electric

power tool and a copy of proof of purchase to a MILWAUKEE factory Service/Sales Support Branch location

or MILWAUKEE Authorized Service Station, freight prepaid and insured, are requested for this warranty to be

effective. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or

attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear

and tear, lack of maintenance, or accidents.

* The warranty period for Hoists (lever, hand chain, & electric chain hoists), all Ni-CD battery packs, Work

Lights (cordless ﬂ ashlights), Job Site Radios, and Trade Titan™ Industrial Work Carts is one (1) year from the

date of purchase. *The warranty period for Li-Ion battery packs that do not contain V™-technology – 4.0 volts

through 18.0 volts - is two (2) years from the date of purchase.

*There is a separate warranty for V™-technology Li-Ion Battery Packs V™18 volts and above that accompany

V™-technology cordless power tools:

*Every MILWAUKEE V™-technology Li-Ion Battery Pack 18 volts or above is covered by an initial 1000

Charges/2 Years free replacement warranty. This means that for the earlier of the ﬁ rst 1000 charges or two

(2) years from the date of purchase/ﬁ rst charge, a replacement battery will be provided to the customer for

any defective battery free of charge. Thereafter, customers will also receive an additional warranty on a pro

rata basis up to the earlier of the ﬁ rst 2000 charges or ﬁ ve (5) Years from the date of purchase/ﬁ rst charge.

This means that every customer gets an additional 1000 charges or three (3) years of pro rata warranty on

the V™-technology Li-Ion Battery Pack 18 volts or above depending upon the amount of use. During this

additional warranty period, the customer pays for only the useable service received over and above the ﬁ rst

1000 Charges/2 years, based on the date of ﬁ rst charge and number of charges found on the battery pack via

Milwaukee’s V™-technology Service Reader.

Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The

manufacturing date of the product will be used to determine the warranty period if no proof of purchase is

provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS

A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU

DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT

SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE

DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE

AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING,

BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN

LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED.

WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL

OTHER WARRANTIES.

This warranty applies to product sold in the U.S.A., Canada and Mexico only.

Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s web-site www.

milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty

and non-warranty service on a MILWAUKEE electric power tool.

WARNING To reduce the risk of in-

jury, always unplug the charger and remove

the battery pack from the charger before

performing any maintenance. Never disas-

semble the battery pack or charger. Contact a

MILWAUKEE service facility for ALL repairs.

To reduce the risk of injury and damage, never

immerse your battery pack or charger in liquid

or allow a liquid to ﬂ ow inside them.

Powering the Charger with an Inverter or

Generator

The charger will operate with most generators and

inverters rated at 300 Watts or higher.

Maintenance and Storage

Store your charger in a cool, dry place.

As a general practice, it is best to unplug battery

chargers and remove battery packs when not in

use. No battery pack damage will occur, however, if

the charger and battery pack are left plugged in.

Li-Ion Charging Status

Battery Pack

Temperature

Red Charger

Indicator Light

Charging Status

Too Hot

Normal Range

Too Cold

Flashing

Continuous

Flashing

Not charging

Normal charging

Not charging

• If the light indicator ﬂ ashes red and green, check

that the battery pack is fully seated into the bay.

Remove the pack and reinsert. If the problem

persists, contact a MILWAUKEE service facility.

• If the light indicator does not come on, check that

the battery pack is fully seated into the bay. Re-

move the pack and reinsert. If the light indicator

still does not come on, contact a MILWAUKEE

service facility.

Charging a Hot or Cold Battery Pack

The Red ﬂ ashing indicator light on the charger indi-

cates that the battery pack temperature is outside

the charging range. Once the pack is within the

acceptable range, normal charging will take place

and the red light will be continuous. Hot or cold

battery packs may take longer to charge.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Milwaukee 48-59-1801 User Manual Page 4

Comments to this Manuals

Related products and manuals for Battery chargers Milwaukee 48-59-1801