WIRING SPECIFICATIONS
1 Red ----- ----- Connect to the positive terminal on motor and 'M1' on switch.
2 Black ----- ----- Connect to the negative terminal on motor and 'M2' on switch.
3 Red 23-66-2935 ----- Component of the switch assembly. Attached to connector block and switch.
4 Black 23-66-2935 ----- Component of the switch assembly. Attached to connector block and PCB assembly.
5 Red 23-66-2935 -----
Part of the switch assy. One of a 5 wire harness that plugs into PCB assy. Other end soldered with #3 to connector block.
6 Blue 23-66-2935 -----
Part of the switch assy. One of a 5 wire harness that plugs into PCB assy. Other end soldered to connector block.
7 Black 23-66-2935 -----
Part of the switch assy. One of a 5 wire harness that plugs into PCB assy. Other end soldered to connector block.
8 Blue 23-66-2935 -----
9 Yellow 23-66-2935 -----
10 Orange 23-66-2935 -----
Part of the switch assy. One of a 4 wire harness that plugs into PCB assy. Other end attached to the switch.
11 White 23-66-2935 -----
Part of the switch assy. One of a 4 wire harness that plugs into PCB assy. Other end attached to the switch.
12 Green 23-66-2935 -----
Part of the switch assy. One of a 4 wire harness that plugs into PCB assy. Other end attached to the switch.
13 Brown 23-66-2935 -----
Part of the switch assy. One of a 4 wire harness that plugs into PCB assy. Other end attached to the switch.
14 Blue 23-66-2935 ----- Component of the switch assembly. Attached to switch and PCB assembly.
= WIRE TRAPS
or GUIDES
PCB ASSEMBLY
12
11
10
13
14
4
6
7
5
9
8
Blue wire #14 and LED wires #8 & #9 are
captured within insulating sleeves
14
3
13
12
1
2
10
11
Diode
SWITCH
6
7
5
4
3
CONNECTOR
BLOCK
2
1
MOTOR
Position motor
with slot to the
top (positive
terminal to the
outside)
MOTOR
LED
AS AN AID TO REASSEMBLY, TAK
NOTICE OF WIRE ROUTING AND
POSITION IN WIRE GUIDES AND
TRAPS WHILE DISMANTLING TOO
BE CAREFUL AND AVOID PINCHIN
WIRES BETWEEN HANDLE HALVE
WHEN ASSEMBLING.
Terminals, Connectors and 1 or 2 End Wire Preparation
Wire
Color
Origin or
Gauge
Wire
No.
Length
Component of the switch assy. Wires #8 and #9 are part of a 5 wire harness that plugs into the PCB assy.
#8 and #9 are sleeved together and connect to the LED at the other end.
Comments to this Manuals