Milwaukee 4096 Operator's Manual download pdf (Page 5)

ASSEMBLY

WARNING To reduce the risk of injury,

always unplug tool before changing or re-

moving accessories. Only use accessories

speciﬁ cally recommended for this tool. Others

may be hazardous.

SPECIFICATIONS

Cat.

No.

Amps Volts

Motor

Protection

Speed

Suggested Diameters in

Medium Aggregate

4004 20 120 Clutch Low - 300 High - 600 Low - 7" - 14" High - 4" - 7"

4005 20 120 Clutch Low - 600 High - 1200 Low - 4" - 7" High - 3/4" - 4"

4079 20 120 Shear Pin Low - 300 High - 600 Low - 7" - 14" High - 4" - 7"

4090 15 120 Shear Pin Low - 375 High - 750 Low - 5" - 8" High - 2-1/2" - 5"

4094 20 120 Shear Pin Low - 450 High - 900 Low - 6" - 10" High - 2" - 6"

4096 20 120 Clutch Low - 450 High - 900 Low - 6" - 10" High - 2" - 6"

4097-20 15 120 Clutch Low - 500 High - 1000 Low - 3" - 5" High - 1-1/4" - 3"

Assembling Dymorigs & Vac-U-Rig® Stands

For Cat. No. 4125 & 4130 only

1. Set the base on the ground. Loosen the hex bolt

and nut (wrench not supplied). Raise the column

upright.

2. To core vertically or horizontally, insert the

large column bolt (provided in separate acces-

sory bag) through the bottom of column and into

the base. Tighten hex bolt and nut (wrench not

supplied).

To angle core, tilt the column to the desired

angle and tighten the hex bolt and nut. Save

the column bolt for future use when vertical or

horizontal coring.

3. Tighten the two (2) black socket set screws

located on the base with the supplied wrench.

4. Screw the four (4) handle spokes (provided in

separate accessory bag) into the hub on the

cradle assembly.

For Cat. No. 4115 & 4120 only

1. Set the base on the ground.

2. Remove two (2) bolts and two (2) lockwashers

from accessory bag.

3. Place the column in the slot of the base.

4. Insert two (2) bolts and two (2) lockwashers and

tighten securely.

Fig. 1

Handle

spoke

Cradle

assembly

Column

Base

Leveling

screws (4)

Column bolts

Socket set

screws (2)

Hex bolt

Moving the Handle to the Other Side

For Cat. Nos. 4125 & 4130 only

Fig. 2 Cradle assembly

Handle

spoke

Column

Base

Leveling

screws (4)

Column

bolts (2)

Lock washers

Socket

screws (4)

Fig. 3

Bubble level

Socket

screw

Ammeter

gauge

Meter

box

Cradle

lock

Cradle

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comments to this Manuals

No comments

Milwaukee 4096 Operator's Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Milwaukee 4096